Kiln Furniture         
Silicon Carbide Shelves
Oxide Bonded Shelves     More information
  (inches)     (inches)  
FS10X 10 x 24 x 1/2 $48.00 FS16X 16 x 24 x 1/2 $76.00
FS12X 12 x 24 x 1/2 $50.00 FS17X 17 x 23 x 1/2 $76.00
FS14X 14 x 28 x 1/2 $76.00 FS18X 18 x 28 x 1/2 $90.00
Exceptional Values!  Prices in effect until stock is sold..
FS140 14 x 20 x 1/2 $42.00 FS22X 22 x 27 x 1/2 $88.00
 
Nitride Bonded Shelves     More information
  (inches)     (inches)  
FSN12 12 x 24 x 1/2 $50.00 FSN13 13 x 26 x 1/2 $68.00
FSN14 14 x 28 x 1/2 $76.00 FSN18 18 x 18 x 1/2 $64.00
FSN28 14 x 28 x 3/8 $76.00 FSN21 21 x 21 x 1/2 $76.00
For nitride bonded plate setters, see below.
1 3/4" dia. Solid Silicon Carbide Posts  
FSP2X 2" high $2.25 FSP8X 8" high $9.00
FSP4X 4" $4.50 FSP10 10" $11.25
FSP6X 6" $6.75 FSP12 12" $13.50
 
Hi-Alumina Square/Rectangular Hi-Alumina Round
  (inches )     (inches )  
F88XX 8 x 8 x 1/4 $8.00 F7RXX 7 1/8 Dia. x 3/16 $3.50
F1010 10 x 10 x 1/4 $12.00 F12RX 12 Dia. x 1/2 $17.10
F1212 12 x 12 x 1/2 $20.00 F15RX 15 1/2 Dia. x 1/2 $24.00
F1414 14 x 14 x 1/2 $24.00 F21RX 21 Dia. x 3/4 $52.00
F1020 10 x 20 x 3/4 $32.00 F26RX 26 Dia. x 3/4 $80.00
F1224 12 x 24 x 3/4 $50.00 F2612 Half 26 Dia. x 3/4 $40.00
F1616 16 x 16 x 3/4 $44.00
F1818 18 x 18 x 3/4 $48.00

Hi-alumina cutting: $2.55 / cut

F1326 13 x 26 x 3/4 $60.00
F1723 17 x 23 x 3/4 $62.00 Kiln Wash
F172T 17 x 23 x 1 $80.00 RKNW3 2.2 lb. $3.25
F2121 21 x 21 x 3/4 $72.00 RKNW4 11 lb. $11.00
F1828 18 x 28 x 3/4 $90.00 RKNWB 33 lb. $20.00
 
mDouble Pointed Clay Stilts Wire Stilts
FS01X 7/8" (01) $.42 FWS34 3/4" $.70
FS02X 1 1/2" (02) $.48 FWS2X 1" $.80
FS03X 2" (03) $.60 FWS3X 1 1/2" $.90
FS4XX 2 1/4" (4) $.42 FWS4X 2" $1.10
FS04X 2 1/2" (04) $.70 FWS6X 2 1/4" $1.20
FS05X 2 3/8" (05) $.81 FWS8X 2 3/4" $1.50
FS06X 3" (06) $1.20 FWS10 3 1/2" $1.70
FS07X 3 1/2" (07) $1.62 FWS14 5 1/2" $3.80
     
Thimbles  (to cone 10) Alone or nested, inverted thimbles make good small shelf supports.

Nested and supported in a clay base, use thimbles to stack earthenware tiles or plates. 

THIM   .75" dia. x 1" high      $.25
 
mRound Shelf Supports, 1 3/4" Dia.  (Recommended for cone 10)
FRS12 1/2" $1.70 FRP5X 5" $3.00
FRP1X 1" $1.90 FRP6X 6" $3.50
FRP2X 2' $2.00 FRP8X 8" $4.80
FRP3X 3" $2.10 FRP10 10" $5.50
FRP4X 4" $2.50 FRP12 12" $6.00
           
New!  Cone 10 Plate Settersm                                          Modular Tile Rack mMortaring Required
FPS12 Hi-Alumina $29.00   FTR4X 4" Rack (6 pcs.) $35.20
FSPSX  SiC $29.00 FB4XX   4" Base or Top   $5.20

Nitride bonded silicon carbide (resists glaze drips) or English hi-alumina. For plates up to 14" dia. & 1.5" high.  If left stacked, will accept plates up to 12.5" dia

 FTR6X   6" Rack (6 pcs.)   $45.60
FB6XX   6" Base or Top   $6.80
FU12X   12-Tile Upright   $7.00
FU15X   19-Tile Upright   $8.00
RMOR2 500 mL Mortar $10.87
 

 

Bead Rack (2 posts with six  10", 9 gauge wires)

 

Extruded Tile Setters  

For non-vitreous clay bodies
FBDRK       30.00

4" x 4" tile setter  11.25" w x 4.75" d x 12" h.  Holds 24 tile + 2 on top.    FRTS4                  $25.00

 

6" x 6" tile setter    7.75" w x 6.25" d x 10" h.  Holds 9 tile + 1 on top.    FRTS6                 $26.00
FBDWE

Wire, various gauges

 3.50/yd.
C6 Plate Setter
FRS10 10" Rack $18.00
FRS15 15" Rack $25.00