|
Frequently Asked Questions |
| This area of our web site will be updated with the answers to your questions, so if you have a kiln related question, and we don't have the answer in our FAQ's drop us an E-mail and we will add it in our next revision. |
| Why doesn't my kiln reach temperature ? |
The elements might be worn out, if so replace them. |
|
There might be a broken element in the kiln. |
|
Your elements might be the wrong voltage (240V elements
with a 208V supply). |
|
Your relays might be faulty. |
|
Electrical failure in another area of your kiln. |
|
The lid prop is still in place. |
| Why does my kiln get too hot ? |
|
Electrical failure in another area of your kiln. |
|
Your relays might be faulty. |
|
Thermocouple is broken or is not properly connected. |
|
You have the wrong cone in the kiln sitter. |
|
Something is preventing the sensing rod from falling e.g.
ware in your kiln, material stuck on rod etc. |
|
Sensing rod is too worn and needs to be replaced. |
| Do I have to replace my connectors when I replace my elements ? |
|
You don't have to, but it is strongly recommended since
bad connectors could ruin your new elements, and their
cost is minimal. |
| More entries will be made to this list shortly, in the mean time e-mail us with any problems you might have and we will respond promptly. |
